The RETScreen Clean Energy Management Software (usually shortened to RETScreen) is a software package developed by the Government of Canada. RETScreen Expert was highlighted at the 2016 Clean Energy Ministerial held in San Francisco. RETScreen Expert is the current version of the software and was released to the public on September 19, 2016. The software allows for the comprehensive identification, assessment and optimization of the technical and financial viability of renewable energy and energy efficiency projects; and the performance of facilities and the identification of energy savings / production opportunities. “Viewer mode” in RETScreen Expert is free and available to all of the functionality of the software. Unlike past versions of RETScreen, however, a new ”

Continue reading “RETScreen” →

As part of a concerted effort to reduce energy consumption, CO 2 emissions and the impact of industrial operations on the environment, This article looks at the development of the standard efficiency (IE3) and premium efficiency motors (PEMs) and associated environmental, legal and energy-related topics.

The oil crisis and the worldwide need for more energy. In 1992 the US Congress, as part of the Energy Policy Act (EPAct) set minimum efficiency levels (see Table B-1) for electric motors. In 1998 the European Committee of Manufacturers of Electrical Machines and Power Systems (CEMEP) issued a voluntary agreement of motor manufacturers on efficiency classification, with three efficiency classes:

Continue reading “Premium efficiency” →

Sustainable energy management in the wastewater sector applies the concept of sustainable management to the energy involved in the treatment of wastewater. The energy consumed by the wastewater sector is usually the largest portion of energy consumed by the urban water and wastewater utilities. The rising costs of electricity, the contribution to greenhouse gas emissions and the growing need for global warming, are driving wastewater utilities to rethink their energy management, adopting more energy efficient technologies and processes and investing in renewable energy generation.

Continue reading “Municipal wastewater treatment energy management” →

Moisture Removal Efficiency (MRE) is a measure of the energy efficiency of any dehumidification process. Moisture removal efficiency is the water vapor removed from the air temperature and humidity, divided by the total energy consumed by the dehumidification equipment during the same time period, including all the fan and pump energy needed to move air and fluids through the system . Water vapor removal is expressed as pounds or kilograms. Energy is usually expressed as kilowatt hours. Inlet air temperature is expressed in degrees Fahrenheit or degrees Celsius. Inlet air humidity may be expressed in several ways, most commonly in the air; the weight of water vapor in the air, compared to the weight of the air that contains it. An example of the MRE of a dehumidification system could be: 4. 4 lb / kWh @ 85 ° F, 140 gr / lb. Using the SI system of units, that same MRE would be 2.0 kg / kWh @ 30 ° C, 20.0 g / kg.

Continue reading “Moisture removal efficiency” →

The Partnership for Energy Efficiency Cooperation (IPEEC) is a high-level international forum that includes developed and developing countries. Its efficiency and effectiveness in the field of energy efficiency and efficiency of energy efficiency gains across all sectors globally. IPEEC provides information to decision-makers in major economies, facilitating candidatures discussions for exchanging ideas and experiences and helping countries to undertake joint ventures. It is also a forum for member and non-member. IPEEC supported initiatives are open to both member and non-member nations as well as the private sector. IPEEC is coordinating the implementation of the Group of 20 (G20) Energy Efficiency Action Plan, which was agreed by G20 leaders in late 2014 as a practical approach to international voluntary energy efficiency collaboration. Since July 2016, IPEEC is coordinating the Energy Efficiency Program (EELP) that provides the basis for a comprehensive, flexible, and adequately-resourced framework for collaborative voluntary energy collaboration among G20 members and beyond. IPEEC has two core committees: the Executive Committee and the Policy Committee. Both these committees are expected to meet the requirements of the current and future projects. which was agreed by G20 leaders in late 2014 as a practical approach to sustainable voluntary international energy efficiency collaboration. Since July 2016, IPEEC is coordinating the Energy Efficiency Program (EELP) that provides the basis for a comprehensive, flexible, and adequately-resourced framework for collaborative voluntary energy collaboration among G20 members and beyond. IPEEC has two core committees: the Executive Committee and the Policy Committee. Both these committees are expected to meet the requirements of the current and future projects. which was agreed by G20 leaders in late 2014 as a practical approach to sustainable voluntary international energy efficiency collaboration. Since July 2016, IPEEC is coordinating the Energy Efficiency Program (EELP) that provides the basis for a comprehensive, flexible, and adequately-resourced framework for collaborative voluntary energy collaboration among G20 members and beyond. IPEEC has two core committees: the Executive Committee and the Policy Committee. Both these committees are expected to meet the requirements of the current and future projects. G20 members and beyond. IPEEC has two core committees: the Executive Committee and the Policy Committee. Both these committees are expected to meet the requirements of the current and future projects. G20 members and beyond. IPEEC has two core committees: the Executive Committee and the Policy Committee. Both these committees are expected to meet the requirements of the current and future projects.

Continue reading “International Partnership for Energy Efficiency Cooperation” →

The German National Action Plan on Energy Efficiency (NAPE) is the National Energy Efficiency Action Plan (NEEAP) for Germany. The plan was commissioned under EU Energy Efficiency Directive 2012/27 / EU of the European Union and released on December 3, 2014. Under the plan, the German government offers an average increase of 2.1% / year in macroeconomic energy productivity from 2008 to 2020. The exact reduction in primary energy is therefore dependent on the rate of economic growth. The NAPE is part of the Climate Action Program2020, also approved on 3December 2014.

Continue reading “German National Action Plan on Energy Efficiency” →

Fuel efficiency is a form of thermal efficiency, which is a conversion of chemical potential energy contained in a carrier (fuel) into kinetic energy or work. (EN) Fuel efficiency, especially fossil fuel power plants or industries dealing with combustion, such as ammonia production during the Haber process. In the context of transport, fuel economy is the energy efficiency of a particular vehicle, given as a ratio of distance traveled per unit of fuel consumed. It is dependent on engine efficiency, transmission design, and tire design. Fuel economy is expressed in miles per gallon (mpg) in the United States and also in the UK (imperial gallon); There is some confusion about the imperial gallon that is not comparable. In countries using the metric system fuel economy is reported as “fuel consumption” in liters per 100 kilometers (L / 100 km). Liters per mil are used in Norway and Sweden. Fuel consumption is a more accurate measure of a vehicle’s performance because it is a linear relationship while fuel economy leads to distortions in efficiency improvements. Weight-specific efficiency (efficiency per unit weight) can be stated for freight, and passenger-specific efficiency (vehicle efficiency per passenger). Liters per mil are used in Norway and Sweden. Fuel consumption is a more accurate measure of a vehicle’s performance because it is a linear relationship while fuel economy leads to distortions in efficiency improvements. Weight-specific efficiency (efficiency per unit weight) can be stated for freight, and passenger-specific efficiency (vehicle efficiency per passenger). Liters per mil are used in Norway and Sweden. Fuel consumption is a more accurate measure of a vehicle’s performance because it is a linear relationship while fuel economy leads to distortions in efficiency improvements. Weight-specific efficiency (efficiency per unit weight) can be stated for freight, and passenger-specific efficiency (vehicle efficiency per passenger).

Continue reading “Fuel efficiency” →

The Fuel Economy Reform Act was a bill (S. 3694 in the 109th United States Congress and S. 767 and S. 768 in the 110th United States Congress) by Barack Obama and Richard Lugar. It’s a standard of corporate average fuel economy fleet by 4% per year, about one mile per gallon. The bill also provides tax incentives for retooling production. Fuel economy gains are the responsibility of the National Highway Traffic Safety Administration, part of the executive branch. Thus, Obama and Lugar remarked on their bill, “Mr. President, we are adopting the authority to reform the economy.” These bills were introduced in the Senate, but did not pass.

Continue reading “Fuel Economy Reform Act” →

The European Movement for Efficient Energy (EME²) is a stakeholder platform that seeks to promote energy efficiency in Europe. This would be more of a producer and provider of energy, particularly water and land. This is EME² refers to “efficient energy.” The current primary focus is on the supply of more energy-efficient electricity and combined heat and power.

Continue reading “European Movement for Efficient Energy” →

ESA Automation is a multinational group that manufactures technologies for industrial automation, energy management and for CNC and motion. ESA Automation is headquartered in Mariano Comense, Como, Italy, and has branches in Spain, Germany, United States, Turkey, China and India. In Italy it has also been developed by a multinazional group for the production of industrial automation, for the purpose of controllability and CNC motion. The main sua sede in Mariano Comense (CO) e ha filiali in Spagna, Germania, USA, Turchia, Cina | subsidiaries]]: ESA Elettronica SpA in Pontedera and ESA Energy Srl in Rovereto.

Continue reading “ESA Automation” →

Domestic housing in the United Kingdom presents a possible opportunity for achieving the 20% overall cut in UK carbon dioxide emissions targeted by the Government for 2010. However, the process of achieving this goal is the UK housing stock.

Continue reading “Energy efficiency in British housing” →

European Commission definitions of energy efficiency, are given below:

European Commission requirements regarding energy use in the EU (Directive 2012/27 / EU) establish a common framework of measures for the promotion of energy efficiency within the European Union to: failures that impede efficiency in the supply and use of energy. Provides for the establishment of indicative national energy efficiency targets for 2020

Continue reading “Energy efficiency in agriculture” →

” This article is about the energy efficiency gap. For issues related to gerrymandering and elections (eg, Stephanopoulos and McGhee, 2014), see Wasted vote. ” Energy efficiency gap refers to the improvement of energy efficiency or the difference between the cost-minimizing level of energy efficiency and the level of energy efficiency. energy efficiency actually realized. It has attracted considerable attention among energy policy analysts, because it exists for the sake of cost-effective investment in energy efficiency, even though they could significantly reduce energy consumption at low cost. This term was first coined by Eric Hirst and Marilyn Brown in a paper entitled “Closing the Efficiency Gap: Barriers to the Efficient Use of Energy” in 1990.

Continue reading “Energy efficiency gap” →

The Energy Efficiency and Conservation Act is an Act of Parliament in New Zealand. It is administered by the Ministry for the Environment. The Act established the Energy Efficiency and Conservation Authority. The Act requires the Energy Efficiency and Conservation Authority to prepare a national energy efficiency and conservation strategy for approval by the Minister. The minister is required to have a national energy efficiency and conservation strategy at all times.

Continue reading “Energy Efficiency and Conservation Act 2000” →

Energy conversion efficiency (η) is the ratio between the useful output of an energy conversion machine and the input, in energy terms. The input, as well as the useful output may be chemical, electric power, mechanical work, light (radiation), or heat.

Continue reading “Energy conversion efficiency” →

An energy audit is an inspection of an energy flow analysis, for energy conservation in a building, process or system to reduce the amount of energy input into the system without negatively affecting the output (s). In commercial and industrial real estate, an energy audit is the first step in identifying opportunities to reduce energy expenses and carbon footprints.

Where the object of study is an occupied building then reduces energy consumption while maintaining or improving human comfort, health and safety are of primary concern. Beyond simply identifying the sources of energy, an energy audit seeks to prioritize the energy costs according to the greatest cost effective opportunities for energy savings.

Continue reading “Energy audit” →

The Energy Saving Ordinance (EnEV) is a regulation in Germany. Private and most commercial buildings are built according to the regulations. The requirements are set to strict standards in irregular intervals.

Continue reading “Energieeinsparverordnung” →

An Eco-house is an environmentally-friendly low-impact home designed and built using materials and technology that reduces its carbon footprint and lowers its energy needs. This includes: Better than normal levels of insulation Better than normal levels of daylight Good or double-triple-glazed windows Passive solar orientation – glazing oriented south for light and heat Thermal energy in solar thermal energy (HVAC)

Buildings use up huge amounts of energy. Some calculations make it as much as 70% of all the energy used in the UK when all the factors are taken into account. This energy is mainly for heating and lighting and is the most important of all.

Continue reading “Ecohouse” →

The Consortium for Energy Efficiency (CEE) is a nonprofit 501 (c) (3) organization that promotes the adoption of energy efficient products and services. EEC specifications are referenced by the United States Department of Energy and by the United States and Canada. The organization’s Annual Industry Report documents the efficiency industry US $ 8 billion in annual expenditures.

Continue reading “Consortium for Energy Efficiency” →

The Office of Energy Efficiency is an agency of the Government of India, under the Ministry of Power created in March 2002 under the provisions of the 2001 Energy Conservation Act. The agency’s function is to develop programs which will increase the conservation and efficiency of energy in India. The mission of the Office of Energy Efficiency is to “institutionalize” energy efficiency services, enable delivery mechanisms in the country and provide leadership energy efficiency in all sectors of the country. The primary objective would be to reduce energy intensity in the economy. The broad objectives of BEE are as under: To exert leadership and provide policy recommendation and direction to national energy conservation and efficiency efforts. To establish a system of measurement and efficiency and to measure energy efficiency in a macro level. The Energy Conservation Act and efficient use of energy and its conservation programs. To be successful in the delivery of energy services as mandated in the EC through private-public partnerships. To interpret, plan and manage energy conservation programs in the Energy Conservation Act.

Continue reading “Bureau of Energy Efficiency” →

To improve energy efficiency, the Hong Kong Government formulated a Energy Efficiency Ordinance (建築物 能源 效益 條例) which was passed by the Legislative Council in November 2010. Under the Ordinance, certain prescribed types of buildings have to comply with Building Energy Code (BEC) and / or Energy Audit Code (EAC). Under the Ordinance, building services installations including electrical, air-conditioning, lighting and lift and escalator installations in new built structures are required to meet the minimum energy efficiency standards and requirements Code of Practice for Energy Efficiency Building Services. Existing buildings will also be required to comply with the requirement when undergoing major retrofitting works. The standards stipulated in the Code, which were published in the last version promulgated in 2007, which have been implemented on a voluntary basis. Most of the new standards are comparable to those adopted in the US, Europe and the Asia-Pacific region. In addition, the central building services of commercial buildings and commercial buildings of composite buildings are required to carry out energy audits in accordance with the Code of Practice for Building Energy Audit every 10 years, and the results have to be displayed in a conspicuous position at the main entrance of the buildings concerned for public inspection. Implementation of the Ordinance is operated by the Electrical and Mechanical Services Department

Continue reading “Buildings Energy Efficiency Ordinance” →